The Francis turbine is a type of water turbine that was developed by James B. Francis
It is an inward flow reaction turbine that combines radial and axial flow concepts
Most common water turbine in use today.
Suitable for hydro-power stations with medium or high head Compact in structure, reasonable in design, convenient in operation and maintenance and excellent in efficiency.
They are in both vertical and horizontal shaft arrangement and can be vastly selected by the hydraulic power stations.
With many years of our own experience and absorbing advanced technology from domestic and abroad sources, and in meeting ever growing requirements of stations for various hydraulic power resources, the manufacture and design level has been raised to new stages.
We, SHPE specialized in Francis turbine over 50 years.
Water Head Applicable: H=20M-450M. Used for middle & high water head with middle level of water flow, it is divided into vertical type and horizontal type. It is simple and reliable in wide application with complete products series.
Technical specification:
Head: 10m~450m
Discharge: 0.33~56.6 Cubic meter
Output: 84kW~60000kW
Maximum efficency of model(%): 91.5~94.7
Main Technical Parameters of Francis turbine |
Model |
Diameter of runner(cm) |
Water Head(m) |
Discharge(m/s) |
Output(kw) |
Maximun efficency of model(%) |
HL80/D3818 |
50-200 |
40-400 |
0.33-16.8 |
110-60000 |
93.14 |
HL90/D54 |
50-200 |
31-380 |
0.33-18 |
84-59710 |
91.7 |
HL90/A179 |
50-200 |
31-380 |
0.30-17.1 |
76-56100 |
91.3 |
HL100/A542 |
50-180 |
31-320 |
0.38-15.1 |
97-42000 |
92.5 |
HL110/A351 |
50-200 |
31-330 |
0.40-21 |
100-60500 |
92.9 |
HL120/A520 |
50-180 |
34-205 |
0.55-18.1 |
150-32400 |
92.7 |
H;130/A548 |
50-180 |
31-250 |
0.55-20.5 |
150-45250 |
92.6 |
HL130/A550 |
50-180 |
31-225 |
0.58-20.4 |
148-40100 |
92.7 |
HL150/A575C |
50-200 |
29-165 |
0.70-26.7 |
170-39320 |
93.56 |
HL160/D46 |
50-180 |
29-175 |
0.8-25.7 |
190-38830 |
91.6 |
HL175/A635 |
50-200 |
29-160 |
0.90-36.0 |
215-50850 |
93.5 |
HL180/D06A |
50-200 |
27-150 |
1.00-38.2 |
220-50000 |
91.5 |
HL180/A194 |
50-200 |
27-150 |
0.90-35.2 |
200-46600 |
92.6 |
HL190/A678 |
50-200 |
25-140 |
0.96-36.4 |
195-45500 |
93.6 |
HL205/A696 |
50-200 |
23-110 |
1.05-36.9 |
200-35850 |
93.8 |
HL210/A630 |
50-200 |
24-100 |
1.09-35.6 |
215-31100 |
94.7 |
HL215/A788 |
50-200 |
25-75 |
1.25-34.6 |
250-22660 |
93.28 |
HL220/A153 |
50-200 |
26-110 |
1.25-41.9 |
270-40240 |
91.5 |
HL220/A722C |
50-200 |
22-70 |
1.10-31.1 |
163-19220 |
94.57 |
HL220/A801 |
50-225 |
26-85 |
1.20-44.3 |
250-33600 |
94.8 |
HL230/D85 |
50-200 |
24-70 |
1.30-36.8 |
255-22750 |
92.7 |
HL230/A743 |
50-225 |
22-85 |
1.20-50.4 |
215-37800 |
94.21 |
HL240/D41 |
50-225 |
21-75 |
1.25-47.3 |
215-31320 |
92 |
HL260/D74 |
50-225 |
20-75 |
1.30-52.5 |
215-34760 |
92.7 |
HL260/A244 |
50-225 |
20-50 |
1.30-43 |
215-20000 |
91.7 |
HL265/A616 |
50-250 |
20-60 |
1.30-58 |
215-30700 |
93.13 |
HL270/A551 |
50-250 |
20-45 |
1.40-52.4 |
230-21000 |
93.2 |
HL290/A551C |
50-250 |
18-45 |
1.40-54.5 |
210-21900 |
93.5 |
HL295/PO820 |
50-250 |
18-45 |
1.40-56.6 |
210-22500 |
92.1 |
1. Before making quotation, please send us the following basic parameters:
A. Flow------ m³/s
B .Water head----- m
C .Installed capacity--- KW
D. Frequency---- 50HZ or 60HZ
E. Length and diameter of the penstock
F. Voltage of the generator
G. Voltage of the transmission line(if the setup transformer is supplied by us ).
H. The quantity of the turbine-generator units
2.Please clearly note the follows in the quotation mail:
A.What is the scope of supply?
B.The hydroturbine-generator is controlled manually or automatically?